GRAE-400-GRAE C00lRooftop
Odor-free eco-friendly mortar without cement
Hole Stop-G
GRAE HOLE-G (GRAE Hole-Stop)
Hole Stop-G
Characteristics
1. Can be repaired in a` normal type (3-4 days based on room temperature) and has excellent adhesion
1) Maximized adhesion with lower extremity using special ultrafine powder and high elastic resin binder
2) No excitation due to difference in thermal expansion rate after attachment with the same material as the concrete structure
3) Water-soluble and has excellent adhesion even with wet substrates. 2. Prevents secondary cracks or pinholes by filling fine cracks or holes 3. Excellent waterproofing and breathability protecting from moisture generated from lower extremities 4. Increases surface strength to increase adhesiveness with intermediate materials and prevents lifting caused by differences in thermal expansion coefficients with heterogeneous materials
Field of application
1. Before waterproofing rooftops or parking lots
2. Plastering polyurea, urethane, epoxy or various flooring materials
3. For protection from moisture before flooring decorations
4. When increasing surface strength is required Plastering method
Plastering method
Items to prepare for plastering
GRAE Hole-Stop- G, GRAE Hole-Stop EXCLUSIVE POLYME
The background is based on Regular concrete (RC) or Precast concrete (PC) structures, and the lifted part of the lower body, foreign matter latencies, etc. Remove and clean with a high-pressure washer or vacuum cleaner. In some cases, the floor should be grounded evenly. Powder and liquid phase can be adjusted according to the site conditions and work thickness when mixing and placing grae hole stops. (See Specifications and Technical Data))
Precautions
Before use, remove any damage or debris on the concrete completely. If the concrete is poor, use our dedicated concrete penetration enhancer (Grae Hard Con). If freezing is expected after plastering and before hardening , do not use, and if plastering is unavoidable, appropriate warming measures must be applied. In the case of liquid, please store it so that it never freezes. Prevent freezing at night in the masquerade during the winter season. Do not cremate in high temperature, dry and windy environments in summer and in temperatures below 5°C and above 30°C outside the site. After mixing with resin, any remaining capacity that has been repaired cannot be reused and should be discarded.
Usage
Approximately 1.6 kg/m2, mm (thickness)
Theoretical application area
4.3mm/3.3m2/powder-1pack + liquid 6kg, 1mm/14m2/powder-1pack + liquid 9kg