GRAE-300-GRAE HEAT
Grae insulation condensation, mold proof paint
GRAE HEAT
Patent No. 10-20180024663-2
Overview
Porous ceramic powder, high elastic acrylic emulsion and UV protection, natural pest protection, anti-aging agents, mold protection agents, etc. added to provide a state-of-the-art eco-friendly paint that combines heat insulation, waterproof, anti-condensation, and mold protection features.
Features
1) Fundamentally blocks the heating rays of the surface’s solar ray to prevent heat from entering into the inside and releasing heat to the outside, reducing energy waste and maximizing the effect of cooling and heating.
2) Excellent waterproofing effect due to dense matrix structure of powder and acrylic emulsion
3) Able to prevent condensation phenomenon that may occur due to a temperature difference due to an insulation effect from the outside, thereby suppressing mold generation.
4) Reduces energy waste and maximizes the effect of heating and cooling, which has an excellent insulation effect, by blocking the heating wire and preventing the internal injection and external release of heat.
5) Able to prevent condensation phenomenon that may be caused by a temperature difference due to an insulation effect from the outside, thereby suppressing mold generation.
6) Excellent weather resistance and adhesion, lasting for a long time.
7) Can be constructed with reliability with eco-friendly products.
8) Various colors and designs are possible.
Storage/validation period
1) Store in a shaded place above 5℃ and below 30℃ and never freeze the product.
2) Water-soluble matt/room-temperature for 6 months/white
Use
All buildings, such as apartments, houses, refrigerators, refrigeration warehouses, factories, etc., and facilities such as oil pipelines, zink ceilings, oil refineries, cooling and heating machinery, pipes, ducts, etc. that require insulation, condensation prevention, and mold prevention;
How to use
1) Stir sufficiently using an electric stirrer for more than 5 minutes.
2) Remove contaminants such as latency, oil, and rust on the lower ground and clean them thoroughly.
3) Fill grooves and cracks with elastic putty or our quickie
4) Apply non-flammable paint evenly with a brush, roller, and spray. At this time, the re-coating interval should be applied after checking that it is dry after 5 hours at room temperature, and then apply it at least 3 times.
Precautions
Packaging/Construction area
Theoretical application area
Storage/validation period
1) Store in a shaded place above 5℃ and below 30℃ and never freeze the product.
2) Water-soluble matt/room-temperature for 6 months/white