GRAE-H100-SSAK3S
Eco-friendly herbicide
SSAK3S
Overview
– Classification: Microelement compound fertilizer (cost of foliar application)
– Packing unit: 500ml, 1L
– Registration number: Yeoncheon 022-Ga-10804
– Product code: 21000 4938 6924, 21000 4938 6931
– Usage: Removes weeds, eradicate harmful animals and harmful birds in one shot
Features and Effects
1. Patent No. 10-2021-0034812 (Eco-Friendly Herbicide)
2. Maximizes the effects by using natural materials such as alginate, citric acid, and aloe.
3. Remove weeds quickly within an hour of spraying and removes dead leaves and stems
4. Blocks harmful animals (wild pigs, elk, etc.) and harmful birds (pheas, crows, magpies, etc.) with its unique smell.
5. Easy to use.
6. Rapid vaporization making it harmless to the soil.
7. For food crops, it can be applied up to 24 hours before harvest.
8. Pre-harvest restrictions leave little or no residue in the food.
9. Removes weeds in schools, golf courses, trails, parks, sidewalk block weeds, greenhouses, and various places.
How to use
1.Water 10 to 30 times according to each product (adjust according to the growth of weeds)
2.Do not use the undiluted solution.
Precautions
1. Consider the growth stage and vary the dilution ratio.
2. Spray on sunny days if possible.
3. Spray again if it rains within 3 days after spraying.
4. Spray carefully so that no areas are missing.
5. Use only on weeds.
6. When used for the purpose of preventing harmful animals and birds, spray every 3 to 7 days.
7. Use safety equipment such as rubber gloves, masks, and goggles.
8. Never eat or drink. When contact with the skin, seek medical advice immediately.
Field of application
Where eco-friendly products on floor are required, such as apartments, houses, and shopping malls
Children’s homes, art galleries, underground spaces, etc. where eco-friendliness of indoor buildings are required
Construction order
Clean the surface before construction and apply primer sufficiently to the floor.
According to the recommended water ratio, first put water in the mixer containert and slowly add malt to mix for more than 5 minutes.
After placing about half of the primary thickness, place a wire mesh in the middle and finish the desired thickness on top.
Recommended water ratio: 16–17%
Construction Precautions
Refrain construction at 35℃ or higher and 90% or higher humidity.
Refrain construction if there is a lot of rain, snowfall, and wind or dust.
Observe the water ratio as excessive input of water can cause quality degradation.
usage
2-2.2kg/㎡/1mm